Assy Stapler (Mfx-3595) - Muratec MFX-3595 Field Engineering Manual

ASSY STAPLER (MFX-3595)

1. Remove the Cover left. (See "PCB PSU" on page 5-40.)
2. Remove one screw [1], then remove the ground wire. (See "PCB PSU" on page 5-40.)
3. Remove two screws [1].
4. Pull out the ASSY STAPLER [2] a little and remove the Cable ASSY stapler [3].
5. Remove the ASSY STAPLER [2].
[ 3 ]
[ 2 ]
[ 1 ]
[ 1 ]
5-81