Muratec MFX-3595 Field Engineering Manual page 233

1. Connect the USB memory in which the firmware is stored.
2. Press <Mode>, <*>, <9>, <8>
3. Press [Update from the USB].
4. Press either [Update to the latest version] or [Specify with specified version].
5. When you have selected [Update to the latest version], go to step 8.
When you have selected [Specify from list to update], press [File selection (Main):].
6. Select the ROM version to update, and press [Close].
7. Press [Update].
8. Press [Yes] and the updating starts.
9. When the display shows "Firmware Updating OK", turn the machine OFF and remove the USB memory.
10. Press [Machine Info] on My MFP Menu screen, and check the ROM version is updated.
NOTE
When you have selected [Update to the latest version] in step 5 while the machine is already the latest
version, the display shows "Already up-to-date" and updating does not start.
3.42.3 Updating the firmware using the network
Update the machine firmware using an ROM data prepared on a network location.
Store the ROM data on a network location in advance. See how to name the folder in which you store the
firmware on the former page.
Setup
Set up the following items to use this function. This step is required only for the first time when you use this
function.
Protocol
Path
Account
Password
Proxy Server
Proxy Port
1. Press <Mode>, <*>, <9>, <8>.
2. Press [Update from the network].
3. Press [Specifying Server].
4. Enter the items as necessary.
Select the protocol from http, FTP, or SMB.
Enter the path to the firmware.
Enter the account to access the location where the firmware is stored.
Enter the password to access the location where the firmware is stored.
Enter the proxy server.
Enter the proxy server port number.
3-127