Replacement Of Clutch Cst - Muratec MFX-3595 Field Engineering Manual

Replacement of CLUTCH CST

1. Remove one screw [1] then remove the Cover back OP [2].
2. Disconnect the junction connector [3].
3. Remove the SR4 [4], then remove the CLUTCH CST [5].
4. Reverse the procedure to assemble.
[ 5 ]
[ 4 ]
[ 2 ]
Important
When attaching the Clutch CST, pass through the harness hole [6] and hook it onto the hook [7].
[ 7 ]
[ 6 ]
[ 3 ]
[ 1 ]
5-89