Muratec MFX-3595 Field Engineering Manual page 235

0002 Machine is printing.
0003 Machine is operating and printing.
0004 Machine is scanning.
0005 Machine is printing and scanning.
0006 Machine is operating and scanning.
0007 Machine is operating, printing, and scanning.
0008 Machine is communicating.
0009 Machine is operating and communicating.
000A Machine is printing and communicating.
000B Machine is operating, printing, and communicating.
000C Machine is scanning and communicating.
000D Machine is operating, scanning and communicating.
000E Machine is printing, scanning and communicating.
000F Machine is operating, printing, scanning and communicating.
For example
When the display shows 11020(008A), the update did not start because the memory is in use, and the ma-
chine was printing and communicating.
3.42.4 The indication while updating
While the firmware is being updated, you can be checked the status through LED lamps on the panel.
Status
Lighting LED
1 <Login>
2 <Personal Mode>
3 <Job Confirm.>
4 <Energy Save>
Result
Lighting LED
5 Information lamp
This is a sample image of MFX-3535.
Status
Initializing step
ROM data acquisition step
Updating step
Flashes during above steps
ROM type
Green : Update failed
Orange : Update failed
3-129
1 2 3 5
4