Sensor Txil / Ds1 - Muratec MFX-3595 Field Engineering Manual

SENSOR TXIL / DS1

1. Remove the Cover Tx side B. (See "COVER TX SIDE B" on page 5-5.)
2. Disconnect each connector for the SENSOR TxIL [1] and the Sensor DS1 [2].
3. Remove the SENSOR TxIL [1] and the Sensor DS1 [2].
* There are hooks on the short side (1 place) and the long side (2 places) on the sensor.
Remove the long side first.
CAUTION
When assembling, please be careful to plug in the connectors correctly.
Sensor TxIL··· Harness color: Red (marked R)
Sensor DS1··· Harness color: Blue (marked B)
5-6