Muratec MFX-3595 Field Engineering Manual page 234

Update
1. Press <Mode>, <*>, <9>, <8>.
2. Press [Update from the network].
3. Press either [Update to the latest version] or [Specify with specified version].
4. When you have selected [Update to the latest version], and go to step 7.
When you have selected [Specify from list to update], press [Main Unit Version:].
5. Enter the ROM version to update, and press [Enter].
6. Press [Update].
7. Press [Yes] and the updating starts.
8. When the display shows "Firmware Updating OK", turn the machine OFF and ON.
3.41.4 About error
If an error occurred during updating, a five-digit error code will be displayed.
Code Cause / Countermeasure
11000 General error.
11020 Start error detected.
11030 Could not find the ROM file. Check the specified file.
11040 USB memory read error. Check the USB memory is working correctly.
11050 Network error. Check that the machine is connected to a network.
11060
11070 File read error. Check that the ROM file are stored correctly.
11080
11200 The machine is in use. Update when the machine and the memory are free.
11400 Could not find the ROM file. Check the specified file.
11500 (MEX-3595 only) Firmware version of main control board and panel do not match.
12030 Unable to update. Check the main control board is working correctly.
13010 Error occurred during access to ROM saving storage. Check that the SD card is
working.
13030 There is not enough free space on the SD card to save the ROM.
13040 The attribute of the ROM is either for read only, an attribute of a directory or a hid-
den file.
13050 Error occurred during access to ROM saving storage. Check that the SD card is
working.
Start error (11020)
The detailed error code will be displayed when you press <Mode>, <*>, <9>, <8>. The four-digit numbers in
the parenthesis is the detailed errors for start error.
Third digit error code
Code Cause / Countermeasure
0020 Fax is in use. (Reserved communications are existing.)
0080 Memory is in use.
00A0 Fax and memory are in use.
Last digit error code
Code Cause / Countermeasure
0000 No information
0001 Machine is operating.
3-128