Muratec MFX-3595 Field Engineering Manual page 173

Unique Switch 07x : Operation
Unique Switch 070 :
Initial
Switch
Setting
7 1 Factory use only
6 1 Factory use only
5 1 Factory use only
4 0 Factory use only
3 0 VoIP and Super G3 setting
for Tx
0: Off
1: On
2 0 Factory use only
1 0 Factory use only
0 0 Factory use only
Unique Switch 071 :
Initial
Switch
Setting
7 0 Line monitor in Quick memory
transmission
0: Off
1: On
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 0 Rx document to polling
document
0: No
1: Yes
0 0 Factory use only
Adjust
This switch enables the following two menu added:
1 Tx Mode (Normal Tx/Specific Tx):
<Mode>-[Setting]- [Default Settings]-[Fax Settings]-
[Default setting]-[Tx Mode]- Normal Tx/Specific Tx
(From Fax Ready screen) [Advanced]-[Tx Mode]-
Normal Tx/Specific Tx
2 Super G3 (ON/OFF):
<Mode>-[Setting]- [Management]-[User Install]-
[SuperG3]-ON/OFF
Default setting of Specific Tx:
1) Tx Speed: 14.4 kbps ( 33.6 kbps)
2) Output attenuation: -11dB (-11dB)
3) ECM mode Tx : ON(ON)
4) Super G3 Tx : OFF(ON)
The settings in parentheses are for normal
transmission.
This settings can be changed by memory switch
018 and 019 see page 3-30.
Adjust
Retrieve the document received in the memory by
polling transmission.
3-67
Usage/Comments
Usage/Comments