Sensor Pes - Muratec MFX-3595 Field Engineering Manual

SENSOR PES

1. Open the Cover front and the Cover jam access.
2. Pull out the toner and drum cartridge.
3. Remove one screw [1].
4. Remove the Bracket sensor [2] and then disconnect the connector [3].
5. Remove the SENSOR PES [4].
* There are hooks on the short side (1 place) and the long side (2 places) on the sensor.
After releasing the hook on the short side, slide the sensor to the short side and remove it.
[ 4 ]
[ 3 ]
[ 1 ]
[ 2 ]
5-71