Muratec MFX-3595 Field Engineering Manual page 178

Unique Switch 08x : Miscellaneous
Unique Switch 085 :
Initial
Switch
Setting
7 0 Factory use only
6 0 Print/Send the consumable
order sheet when the drum is
near end
0: Yes
1: No
5 0 Print/Send the consumable
order sheet when toner is
near empty
0: Yes
1: No
4 0 Receive time stamp position
0: Outside the print area
1: Inside the print area
3 0 Factory use only
2 0 Factory use only
1 0 Factory use only
0 1 Factory use only
Unique Switch 086 :
Initial
Switch
Setting
7 1 Factory use only
6 1 Enable sleep mode
0: No (disable)
1: Yes (enable)
5 0 Prepare for printing when
coming back from energy
save mode
0: No
1: Yes
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 0 Factory use only
0 1 Factory use only
Unique Switch 087 ~ 089— Factory use only
Adjust
Set where to print the time stamp.
Adjust
When you set this switch to "0", the machine does
not reach the standard sleep mode but to an en-
ergy-save mode which does not stop the machine
system.
3-72
Usage/Comments
NOTE
For this feature to work correctly, you must
register several items. See "3.17 Consumable
order sheet" on page 3-99.
NOTE
For this feature to work correctly, you must
register several items. See "3.17 Consumable
order sheet" on page 3-99.
Usage/Comments