Pcb Ers Lamp - Muratec MFX-3595 Field Engineering Manual

PCB ERS LAMP

1. Open the Cover jam access. (See "ROLLER TRANSFER ASSY/GUIDE TRANSFER" on page 5-45.)
2. Remove the Printer fuser. (See "PRINTER FUSER" on page 5-58.)
3. Remove two Spring C stopper JAC [1].
4. Remove two screws [2] and remove two Stopper JAC [3] from the lug.
5. Remove the Cover jam access [4].
6. Disconnect the connector [5].
7. Remove one screw [6], then remove the Bracket PCB LED [7].
[ 5 ]
[ 7 ]
[ 3 ]
[ 1 ]
[ 2 ]
[ 6 ]
[ 2 ]
[ 3 ]
[ 1 ]
[ 4 ]
8. Pull out the PCB ERS LAMP [8] from the Bracket PCB LED [7].
[ 7 ]
[ 8 ]
5-74