Dram Check - Muratec MFX-3595 Field Engineering Manual

3.14.4 DRAM Check

This mode is used to test the DRAM memory, or document memory.
1. Press <Mode>, <*>, <1>, <1>, then select [DRAM Check].
2. Enter the test data.
3. Depending on the amount of DRAM in the unit, press <0>.
4. Press [Start].
The machine starts checking and the result (OK/NG) will be shown in the display.
5. Press [Close] to complete the test.
3.14.5 Pseudo ring test
1. Press <Mode>, <*>, <1>, <1>, then select [Pseudo ring test].
2. Press [Start], to ring the bell.
3. Press [End] to stop.
4. Press [Close] to complete the test.
3-94