D Command Table - Icom ID-4100A Advanced Manual

Previous view
10
OTHER FUNCTIONS
Remote jack (CI-V) information (Continued)

D Command table

Sub
Cmd. Data
cmd.
00 see p. 10-21 Send operating frequency for
01 see p. 10-21 Send operating mode for transceive
03 see p. 10-21 Read operating frequency
04 see p. 10-21 Read operating mode
05 see p. 10-21 Send operating frequency
06 see p. 10-21 Send operating mode
07
0C see p. 10-21 Read frequency offset*
0D see p. 10-21 Send frequency offset
0F
10
11
12
14 01 0000 to
0255
03 0000 to
0255
0A see p. 10-21 Send/read RF power setting
0B see p. 10-21 Send/read external microphone gain.
16 see p. 10-22 Send/read VOX gain.
15 01 00
01
02 0000 to
0255
05 00
01
11 0000 to
0255
16 42 00
01
43 00
01
02
46 00
01
4B 00
01
02
5B 00
01
02
5C 00, 01, 02
5D 00 to 09
Description
transceive
Select VFO mode
1
Read duplex setting
(10=simplex, 11=DUP–, 12=DUP+)
Set simplex operation
Set DUP– operation
Set DUP+ operation
Send/read audio output level
( 000=Minimum, 0128=Center,
0255=Maximum)
Send/read squelch level
( 000=Minimum, 0128=Center,
0255=Maximum)
Read noise/S-meter squelch status
(squelch close)
Read noise/S-meter squelch status
(squelch open)
Read S-meter level
(0000=S0, 0170=S9)
Read tone squelch and RF squelch
status (squelch close)
Read tone squelch and RF squelch
status (squelch open)
Read RF power meter
(0026=LOW, 0077=MID, 0255=HIGH)
Send/read Repeater tone OFF
Send/read Repeater tone ON
Send/read Tone squelch OFF
Send/read Tone squelch ON
Send/read Reversed Tone squelch ON
Send/read VOX function OFF
Send/read VOX function ON
Send/read DTCS OFF
Send/read DTCS ON
Send/read Reversed DTCS ON
Send/read DSQL/CSQL OFF (DV
mode only)
Send/read DSQL ON (DV mode only)
Send/read CSQL ON (DV mode only)
Send/read GPS TX mode
(00=OFF, 01=D-PRS, 02=NMEA)
Tone setting
00=OFF, 01=TONE, 02=TSQL,
03=DTCS, 04=TSQL-R, 05=DTCS-R,
06=DTCS (T), 07=TONE (T) /DTCS
(R), 08=DTCS (T)/TSQL (R), 09=TONE
(T) /TSQL (R)
Sub
Cmd. Data
cmd.
18 00
01
19 00
1B 00 see p. 10-22 Send/read Repeater tone frequency
01 see p. 10-22 Send/read Tone squelch frequency
02 see p. 10-22 Send/read DTCS code and polarity
07 see p. 10-22 Send/read CSQL code (DV mode)
1C 00 00
01
1F 00 see p. 10-22 Send/read DV MY call sign
01 see p. 10-22 Send/read DV TX call signs
02 see p. 10-22 Send/read DV TX message
20 00 00 00* 3
01* 3
01 see p. 10-23 Output DV RX Call signs for transceive
02 see p. 10-23 Read DV RX Call signs for transceive
01 00 00* 3
01* 3
01 see p. 10-23 Output DV RX message for transceive
02 see p. 10-23 Read DV RX message for transceive
02 00 00* 3
01* 3
01 see p. 10-23 Output DV RX status for transceive
02 see p. 10-23 Read DV RX status for transceive
03 00 00
01
01 see p. 10-24 Output DV RX GPS/D-PRS data for
02 see p. 10-24 Read DV RX GPS/D-PRS data for
04 00 00
01
01 see p. 10-26 Output DV RX GPS/D-PRS message
02 see p. 10-26 Read DV RX GPS/D-PRS message for
10-20
Description
Turning OFF the transceiver
Turning ON the transceiver* 2
Read transceiver ID
Send/read Transceiver's status (RX)
Send/read Transceiver's status (TX)
Send/read Auto DV RX Call signs
output OFF
Send/read Auto DV RX Call signs
output ON
Send/read Auto DV RX message
output OFF
Send/read Auto DV RX message
output ON
Send/read Auto DV RX status output
OFF
Send/read Auto DV RX status output
ON
Send/read Auto DV RX GPS/D-PRS
data output OFF
Send/read Auto DV RX GPS/D-PRS
data output ON
transceive
transceive
Send/read Auto DV RX GPS/D-PRS
message output OFF
Send/read Auto DV RX GPS/D-PRS
message output ON
for transceive
transceive