Previous view
5
GPS OPERATION
Transmitting D-PRS data
When D-PRS is selected as GPS TX mode, you can
transmit D-PRS data.
When operating in the D-PRS mode, the following
codes are transmitted to the PC.
D-PRS code is based on APRS
(APRS
®
: Automatic Packet Reporting System).
D D-PRS
D-PRS is a mode that simultaneously sends position
data received from the internal or external GPS
receiver, using the slow speed data packet space,
along with voice in the DV mode.
In an analog mode, you can transmit or receive
only voice or data at one time. However a D-PRS
capable radio can transmit or receive message data
or GPS position data at the same time voice is being
transmitted or received.
I-GATE is required to send position data to the APRS
server.
The image of D-PRS
<Using a repeater>
Voice, Messages and
D-PRS positions
Voice, Messages and
D-PRS positions
<Simplex>
Voice, Messages and
D-PRS positions
D Operating in the D-PRS mode
To transmit in D-PRS, follow the steps below, and
for more details, see the pages listed along with the
steps.
1. "MY" (Your own call sign) entering (p. 9-47)
2. Receiving GPS data (p. 5-2)
3. Set "GPS TX mode" to "D-PRS." (p. 5-15)
L Set transceivers prior to the ID-4100A/E to "GPS-A
(DV-A)."
4. Set TX information (pp. 5-15 ~ 5-22)
L You must set SSID and symbol.
( GPS > GPS TX Mode > D-PRS > TX Format >
Position, Object, item or Weather > SSID, Symbol)
Complete (You can transmit in the D-PRS mode.)
®
code.
D-STAR
repeater
D-PRS positions
I-GATE
Voice, Messages and
D-PRS positions
D-PRS positions
I-GATE
NOTE:
• If "GPS select" is set to "Manual," the manually
entered position data in "Manual Position" is
change to the D-PRS data format to transmit.
(p. 9-24)
(GPS > GPS Set > Manual Position)
• Please note that if "GPS Auto TX" is set to any
other setting than "OFF," the data is transmitted
according to the set time. (p. 9-40)
(GPS > GPS Auto TX)
Information from an APRS network
D-PRS
positions
APRS server
TIP: In the D-PRS mode, you can transmit
earthquake or weather information, in addition to
position data.
(GPS > GPS TX mode > TX format)
TX format of D-PRS
• Position (Mobile/Base):
Used to transmit position data.
• Object: Used to transmit specific position data.
(Contains a time stamp.)
• Item:
Used to transmit specific position data.
(Does not contain a time stamp.)
• Weather: Used to transmit weather information.
5-13
JA3YUA-Z
PC
You can check the
location on a map site.