Icom ID-4100A Advanced Manual page 208

Previous view
9
MENU SCREEN
Display items (Continued)
Choose your language carefully
When the system language of the transceiver
is set to Japanese, the transceiver has the
capability to display both English and Japanese
characters. HOWEVER, if you select Japanese as
the display language, all menu items throughout
the transceiver system will be displayed in only
Japanese characters. There will be no English item
names. Unless you are fluent in reading Japanese
characters, use this feature with extreme caution.
If you change the transceiver's language to
Japanese, and cannot understand the menu system
in the new setting, you will have to change the
language back to English in "Display Language" or
"System Language," or by doing a partial reset of the
transceiver CPU. A partial reset will not clear your
call sign databases.
To do a partial reset of the CPU, do the following
steps:
1. Push [MENU].
2. Rotate [DIAL] to select the 8th page, then push
[ï].
3. Select the bottom item, then push [ï].
4. Select the upper item, then push [ï].
L Do not select the lower item. The lower item is
for the All reset function, and the All reset clears
all entries and returns all settings to their factory
defaults.
5. The dialog is displayed.
Select the left option, then push [ï].
• When the partial reset is completed, "PARTIAL
RESET" is displayed, then the display automatically
returns to the default screen.
9-65