D When A Signal Is Received; Vfo Scan And A Memory/Bank Scan - Icom ID-4100A Advanced Manual

Previous view
3
PRIORITY WATCH

VFO scan and a Memory/Bank scan

Sequentially checks the Memory or Bank channels
every 5 seconds during a VFO mode scan.
A Memory scan or Bank scan can be selected.
Step 1. Start a Memory or Bank scan
To start a Memory scan (p. 2-6)
1. Push [V/M] to enter the Memory mode.
2. Hold down [SCAN] for 1 second.
• Opens the Scan Type Select window.
3. Rotate [DIAL] to select a scan type, then push
[ï].
• The scan starts.
To start a Bank scan (p. 2-7)
1. Push [V/M] to enter the Memory mode.
2. Push [QUICK].
3. Rotate [DIAL] to select "Bank Select," then push [ï].
4. Select a bank to be scanned, then push [ï].
5. Hold down [SCAN] for 1 second.
• Opens the Scan Type Select window.
6. Rotate [DIAL] to select a scan type, then push [ï].
• The scan starts.
Step 2. Starts the Priority watch (p. 3-2)
1. Push [QUICK].
2. Rotate [DIAL] to select "PRIO Watch," then push [ï].
3. Select the Priority watch option, then push [ï].
• "P" is displayed, and the Priority watch starts.
Step 3. Starts the VFO scan (p. 2-4)
1. In the VFO mode, hold down [SCAN] for 1 second.
• Opens the Scan Type Select window.
2. Rotate [DIAL] to select a scan type, then push
[ï].
• The scan starts.
Example: Sequentially checks the Memory channels
while VFO scanning.
Sequentially checks the Memory
channels every 5 seconds.
0
1
SKIP
VFO
2
mode
999
Scan
M-CH
(5 seconds)
When using VFO scan
and a Memory scan
Step 4. Canceling the Priority watch (p. 3-2)
1. Push [QUICK].
2. Rotate [DIAL] to select "PRIO Watch OFF," then
push [ï].
• "P" disappears, and the Priority watch is canceled.

D When a signal is received

When "ON" is selected.
When a signal is received on the Priority channel, the
channel is automatically selected.
• The "P" icon blinks.
L The scan pause timer and resume settings are the same
as those for a normal scan. (p. 9-18)
Automatically selects the Priority channel.
When "Bell" is selected.
When a signal is received on the Priority channel, the
display remains in the VFO mode.
• A beep sounds and the "S" icon blinks.
Remains in the VFO mode.
3-6
00
01
SKIP
VFO
02
mode
99
Scan
Bank CH
(5 seconds)
When using VFO scan
and a Bank scan