Rx History Items - Icom ID-4100A Advanced Manual

Previous view
9
MENU SCREEN

RX History items

RX History
RX History
When a call is received in the DV mode, the call
information such as the caller station's call sign, the
repeater's call sign, and so on, are saved on this
screen. Up to 50 records can be saved.
L Even if the transceiver is OFF, the saved records
are not deleted.
TIP: To display the RX record contents
On the RX HISTORY screen, rotate [DIAL] to display
the RX record contents (RX01 ~ RX50).
Contents of the RX History Top screen
RX01 ~ RX50 RX history number
CALLER* 1 Displays the caller station's name*
CALLED* 1 Displays the called station's name*
Displays any message included in
MESSAGE
the received call, if entered.
Displays the date and time the call
RX TIME
was received.
Displays when a call is received
GW
through the internet.
Displays when position data is
GPS included. (NMEA or Mobile/Base
station)
Displays when the Object's data is
OBJ
included.
Displays when the Item's data is
ITEM
included.
Displays when the weather station's
WX
data is included.
Displays when an uplink signal is
(UP)
received.
* 1 These items can be changed to the call sign display. In
that case, the call sign and a note that is entered after the
call sign are displayed.
* 2 If the name is not entered, the call sign and a note that is
entered after the call sign are displayed.
* 3 "FREQUENCY" is displayed instead of these items when
the call was not through a repeater (Simplex call), to show
the frequency that was used.
* 4 If you have no position data, these items are not
displayed.
Contents of the detail screen
The contents of the detail screen differ, whether the
position data is included in the received data or not.
The position data that is included in the received data
can be divided into five categories. Depending on the
caller's TX mode or TX format, the displayed items
and these meanings differ.
The following lists show the items for each category.
L No data is displayed when no position data is
received.
TIP: On the RX HISTORY screen, push [ï] to
display the detail screen.
Common items
2 . CALLER* 1
2 . CALLED* 1
RXRPT1* 1, * 3
RXRPT2* 1, * 3
RX MESSAGE
RX TIME
<1. When the caller's TX mode is NMEA>
Compass* 4
Latitude
Longitude
GL
ALT
DIST* 4
COURSE
SPEED
GPS Time
Stamp
Call sign
GPS MESSAGE
9-42
Displays the caller station's name*
Displays the called station's name*
Displays the name of the repeater
that was accessed by the caller
station.
If it was a call through a gateway
and the internet, this item displays
the gateway repeater name of your
local area repeater.
Displays the name of the repeater
you received the call from.
Displays any message included in
the received call, if entered.
Displays the date and time the call
was received.
Displays the caller's direction from
your position
Displays the caller's latitude
Displays the caller's longitude
Displays the grid locator based on
the caller's latitude and longitude
Displays the caller's altitude
Displays the caller's distance from
your position
Displays the caller's direction over
ground
Displays the caller's speed
Displays the time that the caller
acquired the position data.
Displays the caller's call sign
Displays the GPS message included
in the position data of the received
call.
2 .
2 .