Icom ID-4100A Advanced Manual page 239

Previous view
10
OTHER FUNCTIONS
Remote jack (CI-V) information (Continued)
DV RX call sign data
Command: 20 0001, 20 0002
q Header flag data (First byte)
Data
bit7 (0: Fixed)
bit6 (0: Fixed)
bit5 (0: Fixed)
bit4 0/1 0=Voice, 1=Data
bit3 0/1 0=Direct, 1=Through repeater
bit2 0/1 0=No Break-in, 1=Break-in
bit1 0/1 0=Data, 1=Control
bit0 0/1 0=Normal, 1=EMR
w Header flag data (Second byte)
Data
bit2 bit1 bit0
1 1 1 Repeater control
1 1 0 Send auto acknowledge
1 0 1 (Not used)
1 0 0 Request to re-transmit
0 1 1 Send acknowledge
0 1 0 Receive no reply
0 0 1 Repeater disabled
0 0 0 NULL
e ~ !0 : Call sign of the caller station
(8 characters, fixed)
!1 ~ !4 : Note of the caller station (4 characters, fixed)
!5 ~ @2 : Call sign of the called station
(8 characters, fixed)
@3 ~ #0 : Call sign of the access/area repeater (R1)
(8 characters, fixed)
#1 ~ #8 : Call sign of the link/gateway repeater (R2)
(8 characters, fixed)
L " FF" stands for no call sign receiving after turning ON the
transceiver.
Description
—
—
—
Description
10-23
DV RX message
Command: 20 0101, 20 0102
q ~ @0
X X X X X X
• • •
q ~ @0 : Message (20 characters)
@1 ~ @8 : Call sign of the caller station (8 characters)
@9 ~ #2 : Note of the caller station (4 characters)
L FF: When no call sign is received since the transceiver
power ON.
Example: When a Gateway call is received
RX RPT2
GW
RX RPT1
CALLED
YOUR STATION
CALLER: Caller's call sign
CALLED: Called station call sign
RXRPT1: Call sign of the repeater that was accessed
by the caller station
L If it was a call through a gateway and the
internet, this item displays the gateway call
sign of the repeater you received the call from.
RXRPT2: Call sign of the repeater you received the
call from
DV RX Status setting
Command: 20 0201, 20 0202
Data Function
bit7 0 (Fixed)
Receiving a While receiving a digital voice
bit6 0/1 voice call signal, select "1." (Regardless
of DSQL and CSQL setting)
Last call When the last call was
bit5 0/1
finisher finished by you, select "1."
Receiving a When the audio tone can be
bit4 0/1
signal heard, select "1."
Receiving a While receiving a BK call,
bit3 0/1
BK call select "1."
Receiving a While receiving a EMR call,
bit2 0/1
EMR call select "1."
Receiving a When "DV" and "FM" are
bit1 0/1
signal other blinking, select "1."
than DV
Packet loss While displaying packet loss
bit0 0/1
status
@1 ~ @8 @9 ~ #2
X X X X X X
• • •
INTERNET INTERNET
CALLER
Description
—