Off Band Indication - Icom ID-4100A Advanced Manual

Previous view
8
REPEATER AND DUPLEX OPERATIONS

Off band indication

If the transmit frequency is out of the amateur band,
the off band indication, "OFF BAND," is displayed
on the display when [PTT] is pushed. Check the
frequency offset or duplex direction in this case.
(p. 8-2)
Displayed
Auto repeater function
When the operating frequency falls within the repeater
output frequency range, the Auto Repeater function
automatically sets the repeater settings (duplex ON/
OFF, duplex direction, tone encoder ON/OFF).
The Auto Repeater function uses the preset repeater
tone frequency and frequency offset.
NOTE for the USA version transceiver:
When turned ON, the Auto Repeater function has
priority over the manual duplex setting. If the transmit
frequency changes after setting, the Auto Repeater
function may have changed the duplex setting.
Function > Auto Repeater
1. Push [MENU].
2. Rotate [DIAL] to select "Function," then push [ï].
3. Select "Auto Repeater," then push [ï].
4. Select the option to turn ON the Auto Repeater
function.
• OFF:
• ON (DUP):
• ON (DUP, TONE): Turns ON the duplex
5. Push [MENU].
• Returns to the standby screen.
Frequency range and offset direction
Frequency range
145.200 ~ 145.495 MHz
146.610 ~ 146.995 MHz
147.000 ~ 147.395 MHz
442.000 ~ 444.995 MHz
447.000 ~ 449.995 MHz
8-5
Turn OFF the function.
Turns ON only the duplex
operation. (Default)
operation and tone encoder.
Shift direction
"DUP–" is set
"DUP–" is set
"DUP+" is set
"DUP+" is set
"DUP–" is set