Remote Control (Ci-V) Information; D Ci-V Connection Example; D Preparing; D Data Format - Icom ID-4100A Advanced Manual

Previous view
10
OTHER FUNCTIONS

Remote control (CI-V) information

D CI-V connection example

The transceiver's operating frequency, mode, VFO
and memory selection, can be remotely controlled
using a PC.
The Icom Communications Interface V (CI-V) is used
for remote control.

D Preparing

To control the transceiver, first set its address, data
communication speed, and transceive function.
These settings are set on the MENU screen. (p. 9-60)
(Function > CI-V)
L When the OPC-478UC is connected, the received
audio cannot be heard. To hear the received audio,
use the cable as shown to the right.

D Data format

The CI-V system can be written using the following
data formats. Data formats differ according to
command numbers. A data area or sub command is
added for some commands.
Controller to ID-4100A/E
q
FE FE
FE FE
q
ID-4100A/E to controller
w e r t
9A E0 Cn Sc Data area
E0 9A Cn Sc Data area
w e r t
ID-4100A/E
• Connections (ID-4100A/E side)
3.5 (d) mm
1
( ⁄ inch)
8
OK message to controller
y u
FD FE FE
FD FE FE
y u
NG message to controller
10-19
OPC-478UC
(Option)
To the
Speaker jack
PC
SP
SP GND
I/O
E0 9A FB FD
E0 9A FA FD
To the
USB port
GND
SP
I/O