Automatic Dv Detection - Icom ID-4100A Advanced Manual

Previous view
4
D-STAR OPERATION

Automatic DV detection

If you receive an FM signal while in the DV mode, the
"DV" and "FM" icons alternately blink to indicate the
received signal is FM.
When the DV Auto Detect function is turned ON, the
transceiver automatically selects the FM mode to
temporarily monitor the signal. (Default: OFF)
L Regardless of this setting, the "DV" and "FM" icons
alternately blink if you receive an FM signal while in
the DV mode.
TIP: When digital call sign squelch (DSQL) or digital
code squelch (CSQL) is set, the transceiver does not
receive FM signals, even if this function is ON. You
can silently wait for calls from others.
When an FM signal is received while in the DV mode
DV Auto Detect function: OFF
The "DV" and "FM" icons alternately blink, but the
audio cannot be heard.
These icons
alternately blink
DV Set > DV Auto Detect
1. Push [MENU].
2. Rotate [DIAL] to select "DV Set," then push [ï].
3. Select "DV Auto Detect," then push [ï].
4. Select "ON," then push [ï].
5. Push [MENU].
• Returns to the standby screen.
L When an FM signal is received while in the DV
DV Auto Detect function: ON
The "DV" and "FM" icons alternately blink, and the
audio can be heard.
These icons
• • •
alternately blink
The audio
cannot be heard.
4-23
mode, the "DV" and "FM" icons sequentially blink,
and the transceiver receives the signal in the FM
mode.
Thanks for the
nice QSO• • •
The audio
can be heard.