Saving The Setting Data Onto A Microsd Card - Icom ID-4100A Advanced Manual

Previous view
6
USING A microSD CARD

Saving the setting data onto a microSD card

You can save the Memory channels, Menu screen
item settings, and repeater lists on a microSD card.
Saving data settings on a card enables you to easily
restore the transceiver to its previous settings, even if
you perform an All Reset.
TIP: The setting data are saved in the "icf" file
format that is used in the CS-4100
. When the saved data on a card is copied
software
to a PC, you can edit it with the cloning software.
You can save the setting data as a new file or to
overwrite an older file.
To save as a new file
SD Card > Save Setting
1. Push [MENU].
2. Rotate [DIAL] to select "SD Card," then push [ï].
3. Select "Save Setting," then push [ï].
4. Select "<<New File>>," then push [ï].
• Displays the FILE NAME screen.
L The file name is automatically named in the following
manner: Setyyyymmdd_xx (yyyy: Year, mm: month,
dd: day, xx: serial number)
Example: If a second file is saved on April 1, 2017,
the file is named "Set20170401_02."
L To change the file name, see "Save with a different
file name." (p. 6-4)
5. Push [ï].
• The confirmation dialog "Save file?" is displayed.
6. Select <YES>, then push [ï].
• Saves the data settings.
L While saving, a progress bar is displayed, then
returns to the SD CARD screen after the saving is
completed.
7. Push [MENU].
• Returns to the standby screen.
cloning
6-3
To overwrite a file
To overwrite a file, select the file to be overwritten in
step 4 to the left.