Icom ID-4100A Advanced Manual page 157

Previous view
9
MENU SCREEN
Menu items and Default settings (Continued)
NOTE: The default settings shown in bold letters below are for the USA version.
The default settings may differ, depending on your transceiver version.
Headset Set
AF Output
Headset Function Select
VOX
VOX
VOX Level
VOX Delay
VOX Time-Out Timer OFF, 1min, 2min, 3min, 4min,
Icom Headset
Power Save
One-Touch PTT
PTT Beep
Custom Key Beep
Custom Key
Data Device Set
Serialport Function
Bluetooth Device Information
Initialize Bluetooth Device
Headset Only or
Headset & Speaker
Normal, Microphone, or PTT
OFF or ON
OFF, 1~5~10
0.5sec, 1.0sec, 1.5sec, 2.0sec,
2.5sec, or 3.0sec
5min, 10min, or 15min
OFF or ON
OFF or ON
OFF or ON
OFF or ON
[PLAY]:---, [FWD]:UP,
[RWD]: DOWN
CI-V (Echo Back OFF),
CI-V(Echo Back ON), or DV Data
9-14
Selects the AF output option when you use a
Bluetooth headset.
Select the PTT and microphone combination
when either a Bluetooth headset or the radio
microphone are used.
Turn the VOX function ON or OFF when you
use a Bluetooth headset.
Set the MIC Gain level.
If the microphone input level is higher than
this set value, the transceiver starts to
transmit, and if the input level is lower than
this set value, returns to receive.
Sets the VOX Delay time for the transmitter
stays ON after you stop speaking before the
VOX switches to receive.
Sets the VOX Time-Out Timer to prevent an
accidental prolonged transmission.
Sets to use the optional Icom VS-3 Bluetooth
headset.
Sets the Power save function to prolong the
headset battery life.
Sets the One-Touch PTT function to change
between transmission and reception by
pushing [PTT].
Sets to sound a beep when you push [PTT].
Sets to sound a beep when you push custom
key ([PLAY]/[FWD]/[RWD]).
Selects the key function of custom key
([PLAY]/[FWD]/[RWD]).
Sets the data device options.
Selects to transmit or receive CI-V commands
or DV data.
Displays the optional UT-137
information.
Resets the optional UT-137
Bluetooth
unit
.
Bluetooth
unit