D Dv Fast Data Function - Icom ID-4100A Advanced Manual

Previous view
4
D-STAR OPERATION
Data communication (Continued)

D DV Fast Data function

To send data using the DV Fast Data function, do the
following.
L The DV Fast Data communication can be made by
only the following Icom transceivers: ID-4100A/E,
ID-5100A/E*, or ID-51A/E (PLUS, PLUS2, 50th
Anniversary model). (As of April 2017)
*
Usable only when firmware versions CPU M 1.10, S
1.00, C 1.10, and DSP 1.10 or later are installed.
NOTE: When using DV Fast Data function, if you
want to send GPS data to other transceivers that can
receive only slow speed data, set "GPS Data Speed"
to "Slow." (p. 9-49)
(DV Set > DV Fast Data > GPS Data Speed)
TIP: The DV Fast Data function can also be used
when you operating the transceiver through the RS-
MS1A or RS-MS1I
remote control software
L The optional UT-137
Bluetooth
UT-137
Transceiver with
the Bluetooth unit
.
is required.
unit
Bluetooth Android
or iOS
device
DV Set > DV Fast Data > Fast Data
1. Push [MENU].
2. Rotate [DIAL] to select "DV Set," then push [ï].
3. Select "DV Fast Data," then push [ï].
4. Select "Fast Data," then push [ï].
5. Select "ON," then push [ï].
6. Push [MENU].
• Returns to the standby screen.
4-28