Creation Of Programs For Master Station - Mitsubishi MELSEC iQ-F FX5 User Manual

Creation of programs for master station

Create programs for the master station.
Parallel link
operation
SM9090
RUN monitor
SM400
X10
RUN monitor
SM400
X10
3 PARALLEL LINK FUNCTION
62
3.7 Programming
Y10
Link
MOV K1X0
device
C0
Link
MOV C0
device
Link
MOV K1Y0
device
Link
MOV D10
device
C1
Program for indicating link errors
When the parallel link of the master/slave station is
suspended or a setting error occurs, Y10 is set to
ON.
Program for writing link devices
(master station  slave station)
The information from X0 to X3 is written to the link
device.
▪ In the case of normal parallel link mode:
M4000 to M4099 ("K1M4000" etc.)
▪ In the case of high-speed parallel link mode:
D990, D991
K100
The current value of C0 is written to the link device.
▪ In the case of normal parallel link mode:
D990 to D999
▪ In the case of high-speed parallel link mode:
D990, D991
Program for reading link devices
(slave station  master station)
The information from the link device is output to Y0
to Y3.
▪ In the case of normal parallel link mode:
M4100 to 4199 ("K1M4100" etc.)
▪ In the case of high-speed parallel link mode:
D1000, D1001
The current value of the link device is read to
D10, and set to the setting value of C1.
▪ In the case of normal parallel link mode:
D1000 to D1009
▪ In the case of high-speed parallel link mode:
D1000, D1001
D10