Adding Protocols - Mitsubishi MELSEC iQ-F FX5 User Manual

Adding protocols

Add or create a protocol from the predefined protocol library or user protocol library. Add a protocol on the screen displayed
by the following operation.
Protocol setting screen  Edit  Add Protocol
Window
The setting item of above screen is follows.
Item Description
*1
Type Select a protocol type.
Protocol No. Set the number of the protocol to be added.
Manufacturer Set the manufacturer's name of the counterpart device
registered in the library.
Model Set the model of the counterpart device registered in the
library of the selected manufacturer.
Protocol Name Set the protocol name of the counterpart device
registered in the library of the selected model.
: Required, : Not required
*1 Predefined Protocol Library: The predefined protocol library offered by GX Works3
User Protocol Library: The protocol library which a user registered
7 PREDEFINED PROTOCOL SUPPORT FUNCTION
194
7.6 Protocol Setting
Setting requirement
Predefined User Add New
Protocol Protocol
Library Library
  
  
  
  
  
Setting range
• Predefined Protocol
Library
• User Protocol Library
• Add New
1 to 64
Manufacturer's name
registered in the library.
Model registered in the
library of the selected
manufacturer.
Protocol name registered
with the library of the
selected model.