Connection Method - Mitsubishi MELSEC iQ-F FX5 User Manual

Connection method

When connecting to RS-485 communication equipment, use the 10BASE-T cable or shielded twisted pair cables, depending
on the connection method.
PU connector Single wire
(RJ45 connector) (Use twisted pair cable or
10BASE-T cable for LAN.)
F800/A800/F700P/A700 series
■Built-in RS-485 terminal
• In the case of 1-to-1 connection
Twisted pair cable
• In the case of 1-to-n connection
Twisted pair cable
F700PJ/E700/E700EX/D700/V500 series
■PU connector
• In the case of 1-to-1 connection
10BASE-T cable
PU
connector
Built-in RS-485
terminal
Twisted pair cable
Built-in
RS-485
terminal
Termination
resistor
Distributor
10BASE-T
cable
Termination resistor
(Which is built in the FX5 PLC, and must be
arranged by the user for the inverter, and
supplied with or built in for other communication
equipment)
Twisted pair cable
Built-in
RS-485
terminal
5 INVERTER COMMUNICATION
Built-in
RS-485
terminal
5.5 Wiring
5
101