Configuring Detailed Setting Of Protocols - Mitsubishi MELSEC iQ-F FX5 User Manual

Configuring detailed setting of protocols

Set the send/reception parameters of the added protocol. Set the detailed setting of the protocol on the screen displayed by
the following operation.
Protocol setting screen  Select a row of any protocol on the protocol setting screen  Edit Protocol Detailed Setting
Window
The setting item of above screen is follows.
Item Description
■Connected Device Information
Manufacturer Displays the connected device information.
Type
Model
Version
Explanation
■Protocol Setting Information
Protocol No. Displays the protocol number of the selected protocol.
Protocol Name Displays the protocol name of the protocol.
Communication Displays the communication type of the protocol.
Type
■Receive Setting (The setting is required when reception is selected for the communication type.)
Receive Wait Time Set waiting time after the waiting for reception status. If
no matching packet is received within the set time, error
occurs.
■Send Setting (The setting is required when send is selected for the communication type.)
Number of Send Set the number of times the CPU module retries to send
Retries when the sending from the CPU module has not been
completed within the set time of monitoring time. Error
occurs if sending has not been completed despite the
specified number of times of sending retries.
Setting requirement
Predefined User Add New
Protocol Protocol
Library Library
*1 *1
  
*1 *1
  
*1 *1
  
*1 *1
  
*1 *1
  
  
*1 *1
  
*1 *1
  
  
  
7 PREDEFINED PROTOCOL SUPPORT FUNCTION
Setting range



0000H to FFFFH


Arbitrarily (32 characters)
• Send Only
• Receive Only
• Send & Receive
*2
0 to 30000 (unit: 100ms)
0 to 10
195
7.6 Protocol Setting
7