System Information - Fluke 1560 Black Stack User Manual

Use the numeric keys and ENTER to enter the password. If the correct pass-
word is entered, the password settings window will appear allowing you to
change any of the password options.
SET PASSWORD OPTIONS
>PROBE: OFF
The PROBE option controls access to the functions in the PROBE menu. If the
option is ON, access to the PROBE menu requires you to enter the correct pass-
word. The default is OFF. You can change the option using the LR buttons
and pressing ENTER.
The CAL DEVICE option controls access to the device calibration function in
the MODULE menu. If the option is ON, access to the CAL DEVICE menu
function requires you to enter the correct password. The default is ON. You can
change the option using the LR buttons and pressing ENTER.
The PASSWORD option allows you to change the password. You can change
the password by typing in a four-digit number using the numeric buttons '0'
through '9' and pressing ENTER.
Be careful when changing the password. Make a note of your new password and
keep it in a safe place in case you forget it.
5.5.4

System Information

The SYSTEM INFO soft-key function displays system information as follows:
PASSWORD REQUIRED FOR ACCESS.
PASSWORD:
CAL DEVICE: ON
PASSWORD: 1560
5 Soft-Key Functions
LR
System Menu
59