Table of Contents
Advertisement
SELECT THE DATA FOR OUTPUT 01
+CHANNEL specifies the input channel for the positive component of the dif-
ference calculation. –CHANNEL specifies the input channel for the negative
component of the difference calculation. You may enter 0 to ignore that part of
the calculation or 99 to apply the most recent measurement regardless of chan-
nel. Use the numeric buttons to enter a number and press ENTER.
CALCULATION specifies the type of calculation for which the results are dis-
played. The options are given in Table 4 above. The desired option is selected
using the LR buttons and pressing ENTER.
The value sent to the output channel is the result of the specified calculation
type for the +CHANNEL input channel minus the results for the –CHANNEL
input channel. For instance, if +CHANNEL is 2, –CHANNEL is 1, and CAL-
CULATION is AVERAGE, the value will be the average for input channel 2
minus the average for input channel 1. If either channel is specified as 0 it will
be ignored for that part of the calculation. For instance, if +CHANNEL is1,
–CHANNEL is 0, and CALCULATION is INPUT the value will simply be the
resistance or voltage of input channel 1. If both channels are 0 no data will be
output.
The calculation and transmission of data to any output channel occurs any time
either of the specified input channels is measured.
5.3.3
Print Output
The PRINT OUTPUT soft-key allows you to control the printing of measure-
ments to any printer output device. A window appears allowing you to enable
or disable printing to any printer device. You can scroll through the list using
the UD buttons. The indicated printer device can be toggled on or off using
the LR buttons. You do not need to press ENTER. Press EXIT to exit.
+CHANNEL: 1
–CHANNEL: 0
CALCULATION: TEMP
CHANNEL 0=NONE
CHANNEL 99=ALL
5 Soft-Key Functions
Output Menu
51
Advertisement
Table of Contents
