Calculate[N]:Convert:srhigh <Sub-Range_Number; Calculate[N]:Convert:srhigh; Calculate[N]:Convert:test? <Numeric_Value>[,<Numeric_Value>]; Output Channel Commands - Fluke 1560 Black Stack User Manual

Thermometer readout

Table of Contents

returned sub-range is a number from 0 to 5. If the ITS-90 conversion is not se-

lected for the given channel number, a "Settings conflict" error (-221) is

generated.

6.5.4.14

CALCulate[n]:CONVert:SRHigh <sub-range_number>

This command selects one of the ITS-90 high sub-ranges for the given input

channel number. The channel number is given by the CALC suffix n. The

<sub-range_number> is 0 or 6 through 11. 0 sets the sub-range to NONE. If the

ITS-90 conversion is not selected for the given channel number, a "Setting con-

flict" error (-221) is generated.

6.5.4.15

This query command returns the selected ITS-90 low sub-range for the given

input channel. The channel number is given by the CALC suffix n. The re-

turned sub-range is 0 or 6 through 11. If the ITS-90 conversion is not selected

for the given channel number, a "Setting conflict" error (-221) is generated.

6.5.4.16

CALCulate[n]:CONVert:TEST? <numeric_value>[,<numeric_value>]

This query command is used to test the temperature conversion for the given in-

put channel number. It returns the temperature corresponding to the given resis-

tance or voltage. Temperature is calculated using the selected system

temperature units. The channel number is given by the CALC suffix n. The re-

sistance or voltage is specified using the first <numeric_value> parameter. The

second <numeric_value> parameter can be used to specify a CJC temperature

for thermocouple conversions. It is ignored if internal CJC is specified. If it is

omitted when external CJC is specified, a value of 0 is assumed.

6.5.5

Example command: CALC2:CONV:SRLOW?

Example response: 4

Example command: CALC2:CONV:SRH 7

Example command: CALC2:CONV:SRH?

Example response: 7

Example command: CALC2:CONV:TEST? 100.0145

Example response: 0.0100

6 Digital Communications Interface

Commands

Table of Contents