Set Up Device - Fluke 1560 Black Stack User Manual

1560 Thermometer Readout
User's Guide
5.4.2
54
SET THE SCREEN CONTROLS
BRIGHTNESS: 0.90
SCREEN SAVER: 0
The LR buttons can be used to adjust the brightness. Pressing ENTER
moves down to the screen saver parameter. You can enter a time period, in min-
utes, for the screen saver. The display backlight will turn off after this period of
time if no activity occurs with the front panel buttons. Any button pressed re-
stores the backlight. A value of 0 for the screen saver disables it. The range is 0
to 60 min.

Set Up Device

The SET UP DEVICE soft-key function is used for accessing parameters and
functions contained within the add-on modules. First, you must select the de-
vice to set (remember a module may contain more than one independent de-
vice). A window appears showing a list of devices. The list includes the names
of all devices including the internal serial communications device (SERI). Each
device is followed by the address of the module that contains it. The device is
selected using the UD buttons and pressing ENTER.
SELECT A DEVICE TO SET UP
>SERI 0
SPRT 1
TCS 2
PRTS 3
GPIB 4
SERC 4
After the device is selected, another window appears showing the parameters
and functions available from the device. These depend on the device. The set
up device window might appear as follows:
LR
$