Sre <Numeric_Value; Table 22 Status Commands - Fluke 1560 Black Stack User Manual

1560 Thermometer Readout
User's Guide
6.5.10.6
6.5.10.7
104

Table 22 Status Commands

Command
*CLS
*ESE <numeric_value>
*ESE?
*ESR?
*OPC
*OPC?
*SRE <numeric_value>
*SRE?
*STB?
*TST?
*WAI
STATus:OPERation:CONDition?
STATus:OPERation:ENABle <numeric_value>
STATus:OPERation:ENABle?
STATus:OPERation[:EVENt]?
STATus:PRESet
STATus:QUEStionable:CONDition?
STATus:QUEStionable:ENABle <numeric_value>
STATus:QUEStionable:ENABle?
STATus:QUEStionable[:EVENt]?
STATus:QUEue[:NEXT]?
SYSTem:ERRor?
*OPC?
This query command returns "1" as soon as all other pending command opera-
tions are completed. Since all commands are sequential for this instrument this
command is unnecessary.
*SRE <numeric_value>
This command sets the Service Request Enable Register. This register deter-
mines which event bits of the Status Byte Register affect the MSS Master Sum-
mary Status message bit of the Status Byte Register and generate a service
request with the IEEE-488 interface. If any event bit of the Status Byte Register
is set (1) while its corresponding mask bit of the Service Request Enable Regis-
ter is set, the MSS Master Summary Status message bit of the Status Byte Reg-
ister will be set and a service request generated. The value of the
<numeric_value> parameter is a number from 0 to 255 that is the sum of the bi-
nary-weighted values of each mask bit. The Status Byte Register is described in
Action
Clear status
Set Standard Event Status Enable Register
Query Standard Event Status Enable Register
Query Standard Event Status Register
Enable Operation Complete message
Query Operation Complete flag
Set Service Request Enable Register
Query Service Request Enable Register
Query Status Byte
Perform self-test and return status
Wait to continue
Query Operation Status Condition Register
Set Operation Status Event Enable Register
Query Operation Status Event Enable Register
Query Operation Status Event Register
Set status registers to defaults
Query Questionable Status Condition Register
Set Questionable Status Event Enable Register
Query Questionable Status Event Enable Register
Query Questionable Status Event Register
Query system error message
Query system error message