Safety Information; Ex Safety Information - Fluke Stik 1552A Ex Calibration Manual

1551A Ex/1552A Ex
Calibration Manual

Safety Information

A Warning identifies conditions and actions that pose hazard(s) to the user. A Caution
identifies conditions and procedures that could cause Product damage, equipment under
test damage, or permanent loss of data.
General Safety Information is in the printed Safety Information document that ships with
the Product and at www.Fluke.com. More specific safety information is listed where
applicable.
If the Product overheats or is exposed to sudden physical shock, examine it for damage
that can cause a safety risk. If possible, compare the displayed temperature to a known
reference before Product use. If not sure, send the Product to Fluke Corporation. Refer to
"How to Contact Fluke".
Substitution of components will impair suitability for hazardous locations.

Ex Safety Information

This manual contains data and safety regulations that must be followed for safe, reliable
use of the Product in hazardous areas under the detailed conditions. If you do not follow
these instructions, personal injury or Product damage can occur. Violation of applicable
legislation can also occur. Read the full manual before you use the Product. To make sure
of safe Product operation, fully follow all instructions and warnings in the manual. If you
are not sure (due to translation and/or printing errors), refer to the English manual.
An "Ex-hazardous area," as used in this manual, refers to an area made hazardous by the
possible presence of flammable or explosive vapors. These areas are also referred to as
"hazardous locations."
2
gjo006.bmp