Sense:average:count; Sense:average[:State] <Boolean; Sense: Average[:State]; Trigger[:Sequence]:Count <Numeric_Value - Fluke 1560 Black Stack User Manual

1560 Thermometer Readout
User's Guide
6.5.2.6
6.5.2.7
6.5.2.8
6.5.2.9
6.5.2.10
76
<numeric_value> parameter must be a number between 1 and 10. The character
values MIN (1), MAX (10), and DEF (4) are also accepted for the <nu-
meric_value> parameter. The *RST command sets the average count to the de-
fault (4).
Example command: SENS:AVER:COUN 5

SENSe:AVERage:COUNt?

This query command returns the count number for input averaging. The charac-
ter values MIN, MAX, and DEF can be appended to the command to read the
corresponding limits and default.
Example command: SENS:AVER:COUN?
Example response: 4
SENSe:AVERage[:STATe] <Boolean>
This command disables or enables averaging. It is equivalent to setting the AV-
ERAGE option in the AVER function in the INPUT soft-key menu. A
<Boolean> parameter value of 1 or ON enables averaging and 0 or OFF dis-
ables it. The *RST command sets averaging to OFF.
Example command: SENS:AVER:STAT ON

SENSe: AVERage[:STATe]?

This query command returns 1 if input averaging is ON and 0 if it is OFF.
Example command: SENS:AVER:STAT?
Example response: 0
TRIGger[:SEQuence]:COUNt <numeric_value>
This command sets the number of measurements that are acquired when mea-
surement is initiated with the INIT command. It is equivalent to setting the
COUNT N value with the MEAS soft-key function in the INPUT menu. The
<numeric_value> parameter value has the range 1 to 32767. The command also
acceps the words MIN (1), MAX (32767), and DEF (1) for the <nu-
meric_value> parameter. The *RST command sets this value to 1.
Example command: TRIG:COUN 30

TRIGger[:SEQuence]:COUNt?

This query command returns the measurement COUNT N value. The words
MIN, MAX, and DEF can also be appended to the command to read the corre-
sponding limits and default.
Example command: TRIG:COUN?
Example response: 1