System Commands; Idn; Table 21 System Commands - Fluke 1560 Black Stack User Manual

mine the number of devices within a module. The <device_command> is the
command string (enclosed in quotes) passed to the device. Each device has a
unique set of commands (refer to the operating instructions for a specific mod-
ule for a list of its device commands). The <value> parameter, numeric or char-
acter data depending on the command, may be used to set a parameter. The
*RST command does not affect any device configuration parameters.
Example command: SYST:MOD2:DEV1:WRITE "CURR",10
6.5.9

System Commands

This group of commands deals with the general system configuration. The
commands are summarized in Table 21.

Table 21 System Commands

Command

*IDN?

*OPT?
*RST
SYSTem:DATE <year>,<month>,<day>
SYSTem:DATE?
SYSTem:SNUMber <serial_number>
SYSTem:SNUMber?
SYSTem:TIME <hour>,<minute>,<second>
SYSTem:TIME?
SYSTem:VERSion?
UNIT:TEMPerature <unit>
UNIT:TEMPerature?
6.5.9.1 *IDN?
This query command returns the instrument identification string that indicates
the manufacturer, model number, serial number, and firmware version. The se-
rial number can be set with the SYST:SNUM command (Section 6.5.9.6). If the
serial number is not available 0 is returned. The format of the response is as
follows:
HART,1560,<serial_number>,<v.vv>
Example command:*IDN?
Example response:HART,1560,641022,1.11
6 Digital Communications Interface
Action
Query instrument identification
Return model numbers of installed modules
System reset
Set the date
Query the date
Set the system serial number
Query the system serial number
Set the time
Query the time
Query SCPI implementation version number
Set the temperature unit
Query the current temperature unit setting
Commands
99