Input Channel − Setup - QSC MP-M80 User Manual

Input Channel − Setup
The setup screen includes a number of functions that are
primarily "set once and forget". Channel Setup is provided
for all input channels.
1. Setup button – Selects the Setup screen.
2. button – Links / unlinks adjacent
Stereo Link
channels for stereo operation. The odd numbered
channel settings are copied to the even numbered
channel. Pan settings are mirrored. Only odd/even
linking is supported (1-2, 3-4, etc.). Even/odd linking
(2-3, 4-5) is not available.
3. button – Returns all Setup settings, for this
Reset
channel, to default values.
4. field – Displays the name of the channel.
Input Name
Touch to display a keyboard and rename the channel
with a "friendly name". Use only upper and lower case
alpha characters.
5. Polarity switch – Inverts the polarity of the
input signal.
6. Channel Safe During Scene Recall
set to Safe, the channel will not be affected by a
scene recall.
7. Input Trim knob – Adjusts the input sensitivity for the
Mic/Line channels. Not available on the USB Player or Wifi Paging.
8. Phantom Power switch – Turns phantom power on or off for the channel (Mic/Line input channels only). (available on MP-M80 channels 1-8
and on MP-M40 channels 1-4)
9. Video Sync Delay slider – Video Sync Delay allows the audio to be delayed by up to 100 milliseconds. The delay value is also displayed in feet
and meters. This feature is typically used to compensate for "lip flap" which occurs when the latency of a video signal is greater than that of the
accompanying audio.
10. switch – Engages or disengages the Video Sync Delay.
Delay Enable
TD-001578-01-C
1
4
10
switch – When
Inputs
5
7
9
8
Touch an Touch a Channel
Input Bank Setup Button
Mic/Line
(RCA / More)
3
2
6
8