Registering In The United States Or Canada (Consumer Installations); Figure 36: Registration In Progress Screen; Figure 37: Redirect Notification Message - Hughes HN9400 Installation Manual

Commissioning the satellite router

Registering in the United States or Canada (consumer installations)

Figure 36: Registration in Progress screen

4. Click Next on the Registration in Progress screen when prompted to do so.
5. Click OK on the redirect notification message window (shown here) to access the registration
server.

Figure 37: Redirect notification message

6. If you see a Security Alert message concerning the site security certificate, click Yes to accept
the security certificate.
Note: As you progress through the registration screens, you may see numerous Security
Alert screens with messages about Internet site security certificates. Click Yes to accept
the certificate and continue. You may see several of these security screens in a row.
7. Depending on your country location and type of installation, go to
States or Canada (consumer installations)
States and Canada, and enterprise installations
This section applies only to consumer installations in the United States or Canada.
1. Read the INSTALLER NOTICE! carefully.
2. Ask the customer to scroll down to review and accept the subscriber agreement.
on page 47 or Registering outside the United
on page 49.
HN9400 Satellite Router Installation Guide
1038554-0001 Revision B
Chapter 4
Registering in the United
47