Table of Contents
Advertisement
Chapter 6
Accessing the System Control Center
System Control Center home page
HN9400 Satellite Router Installation Guide
64
1038554-0001 Revision B
Prerequisites: To access the System Control Center, a computer with a web browser installed
must be connected to one of the satellite router's LAN ports. (Because the System Control Center
web site is hosted on the router, the computer does not have to be connected to the Internet.)
To open the System Control Center, double-click the System Control Center shortcut on your
computer desktop, or follow these steps:
1. Open a web browser such as Internet Explorer.
2. In the browser address bar, type www.systemcontrolcenter.com or 192.168.0.1 and press
Enter.
Note: To use 192.168.0.1, DHCP must be enabled on the computer.
The System Control Center home page appears as shown in
home page
on page 65.
If you are unable to access the System Control Center, refer to
Control Center
on page 96.
The System Control Center home page contains numerous links to satellite router features and
important information regarding operation of the satellite router.
The button links at the top of the page appear on all System Control Center screens and are
explained in
Button links
on page 67.
System Control Center
Figure 50: System Control Center
Cannot access the System
Advertisement
Table of Contents
Troubleshooting
