Commissioning the satellite router
Figure 11: Satellite Setup menu
4. Click Config File Upload.
Note: Do not click Zip Code File Upload—this button is used to update the ZIP code
table in the router.
Note: The following apply to the screen illustrations in this installation guide:
• Most screen illustrations show only the relevant part of the screen and do not include
features such as browser menus, toolbars, and window borders.
• The screen illustrations are examples. Values shown in these illustrations may not
apply to the satellite router you are installing. Do not use values shown to install
or configure the router unless the instructions say to do so.
• On some screens and in some messages you may see the word terminal or the
abbreviation VSAT. Both refer to the HN9400 satellite router.
• Screen and page are both used to refer to a set of information from your computer
or satellite router that is displayed on your computer monitor.
The Configuration File Upload screen appears.
HN9400 Satellite Router Installation Guide
1038554-0001 Revision B
Chapter 4
27