Examining Receive Status; Figure 59: Finding Additional Receive Status Information; Figure 60: List Of All Rxcodes - Hughes HN9400 Installation Manual

Chapter 6
Parameter
Current Modcod

Examining receive status

HN9400 Satellite Router Installation Guide
74
1038554-0001 Revision B
Level of encoding the router can accept based on the current signal
quality. Lower Modcod numbers are used if signal impairments such
as rain are present. Adaptive coding and modulation (Modcod) is
a Hughes-developed technique that maximizes over-the-air
bandwidth utilization.
You can check the Receive Status parameter to find out if the receive data path is operational
or if there is a problem. Normal receive status is indicated by the message Receiver operational.
(RxCode 5).
The following two illustrations show how you can view a list of all RxCodes or see an explanation
of the currently displayed RxCode. Each RxCode—except RxCode 5—indicates a specific
problem in the receive path.

Figure 59: Finding additional Receive Status information

The next illustration shows the list of all RxCodes. Click the explanation (link) next to the
RxCode to see more information.

Figure 60: List of all RxCodes

System Control Center
Explanation