System Status Button; Ipsec Icon; Figure 53: Ipsec Icon; Table 5: System Status Button Colors - Hughes HN9400 Installation Manual

Chapter 6

System Status button

Button color
Green
Red
Yellow
Orange

IPSec icon

HN9400 Satellite Router Installation Guide
68
1038554-0001 Revision B
The System Status button (only) is a status indicator as well as a link. It changes color to indicate
the satellite router's current status, as explained in
68. To see more detailed status information, click the System Status button to open the System
Status page.

Table 5: System Status button colors

The satellite router is operating normally. (OK appears beneath the System
Status button.)
A problem has been detected.
Performance is temporarily impaired because:
• There may be a problem with Web Acceleration.
• The router may be temporarily using a backup configuration.
• There may be virus activity.
Degraded – The router is fully operational, but performance is temporarily
impaired because:
• The daily download allowance has been exceeded. This allowance does
not apply if the subscriber's service plan has no download limit.
• Not all IPSec sessions are functioning. As a result, data will not flow between
some destinations.
If the System Status button is red
values on the System Control Center information pages (those with tables listing parameters and
values). The red flag indicates a problem related to the parameter listed next to the flagged value.
If the parameter name is underlined, click the parameter name to see a message that may include
helpful information, depending on what the problem is.
An icon that looks like a small lock next to the System Status button means IPSec is enabled.
This icon is shown in

Figure 53: IPSec icon

Figure 53: IPSec icon
Table 5: System Status button colors
Meaning
or yellow , look for a red flag next to any value or
on page 68.
System Control Center
on page