Chapter 4
HN9400 Satellite Router Installation Guide
40
1038554-0001 Revision B
Figure 27: Receive Antenna Pointing screen
Keep the Receive Antenna Pointing screen open until antenna pointing is complete.
The Validate KA Antenna Pointing checkbox is checked by default. If you uncheck it (not
recommended), pointing will not be validated.
If the radio assembly is Ka-band and the text next to this checkbox reads Perform ACP, you
probably selected the wrong LNB. In this case go back to the Receive LNB Selection screen
and select the correct LNB.
Figure 28: DAPT Antenna Pointing Status window
Commissioning the satellite router