Commissioning the satellite router
Manually accessing the antenna pointing screens
Software download—manual commissioning
To manually access the antenna pointing screens.
1. Open a web browser on the installer laptop.
2. Type http://192.168.0.1/fs/registration/ setup.html in the browser address bar and press
Enter. The Satellite Setup menu opens
3. Click Antenna Pointing. The Antenna Pointing screen appears as shown in
Antenna pointing screen
4. Select the antenna pointing tool you will use—DAPT, OPI, or N/A (none).
5. Click Next.
Figure 46: Antenna pointing screen
6. To continue manual commissioning, follow the steps in:
•
Receive antenna pointing – Ka-band
•
Receive antenna pointing – Ku-band
•
Transmit antenna pointing – Ku-band
Prerequisite: Antenna pointing must be completed and validated.
1. Wait for the router's operational software to download.
This may take about 15 minutes.
2. To confirm that the download is complete, follow the steps in
router's files are up to date
The router is now commissioned.
(Figure 44: Satellite Setup menu
on page 55.
on page 39 (Ka-band only)
on page 43 (Ku-band only)
on page 43 (Ku-band only)
on page 58.
HN9400 Satellite Router Installation Guide
Chapter 4
on page 53).
Figure 46:
Confirming that the satellite
1038554-0001 Revision B
55