Selecting Front Panel Lock Mode 2 Or Toggling Between Lock Modes 2 And 1 - Extron electronics DXP 44 HD 4K User Manual

DXP 1616 series — toggling between lock modes 2 and 0
Toggle the front panel lock on and off by pressing and holding the
buttons simultaneously until the following buttons blink twice (approximately 2 seconds).
• The
Esc
• The
Video
See figure 73 for a diagram of the procedure.
Lock mode 2
ENTER
Press and hold for 2 seconds.
Lock mode 0
ENTER
Press and hold for 2 seconds.
Figure 73.

Selecting Front Panel Lock Mode 2 or Toggling between Lock Modes 2 and 1

NOTES:
• If the switcher is in lock mode 1, this procedure selects mode 2.
• If the switcher is in lock mode 2, this selects mode 1 (locks all switcher functions
except selecting mode 2).
Toggle the lock on and off by pressing and holding the
following buttons blink twice (approximately 3 seconds).
• The
Esc
mode 2.
The
•
Video
NOTE: To switch from lock mode 1 (front panel is completely locked) to lock mode 0
(front panel is unlocked), you must first switch to mode 2, then from mode 2 to
mode 0.
> , , and buttons blink twice if the DXP is now in lock mode 2.
Video Audio
and buttons blink twice if the DXP is now in lock mode 0.
Audio
CONTROL I/O
PRESET VIEW ESC VIDEO AUDIO
CONTROL I/O
PRESET VIEW ESC VIDEO AUDIO
Switching between Front Panel Lock Modes 0 and 2 —
DXP 168 and 1616
, , and buttons or LEDs blink twice if the DXP is now in lock
Video Audio
and buttons or LEDs blink twice if the DXP is now in lock mode 1.
Audio
,
Enter Video
I/O
VIDEO AUDIO
CONTROL
ENTER PRESET VIEW ESC VIDEO
and buttons until the
Video Audio
DXP HD 4K Series • Operation
, and
Audio
I/O
46