Input Status Panel
The
Input Status
about the connected inputs. The number of inputs displayed depends on the number of
inputs available on the DXP HD 4K Series model.
Each input is identified by number in the left column. For each input, the following
information is displayed:
Input name — Displays the name of the input.
Signal type — Displays the signal type of the input.
HDCP encryption — Displays the HDCP encryption status of the input (see the table
below for symbol definitions).
Symbol
-
No Signal
Output Status Panel
The
Output Status
outputs. The number of outputs displayed depends on the number of outputs available on
the DXP HD 4K Series model.
Each output is identified by a number in the left column. For each output, the following
information is displayed:
Output name — Displays the name of the output.
Output format — Displays the output format of the output.
HDCP compliance — Displays the HDCP compliance status of each output (see the table
below for symbol definitions).
Symbol
-
No Display
figure
94,
panel (see
1
Definition
The signal is HDCP encrypted.
The signal is not encrypted.
Unable to determine the HDCP status.
There is no signal detected.
figure
94,
panel (see
2
Definition
The display is HDCP compliant.
The display is not HDCP compliant.
Unable to determine the HDCP status.
There is no display detected.
, on the previous page) displays information
) displays information about the connected
DXP HD 4K Series • Internal Web Page
91