Creating Ties - Extron electronics DXP 44 HD 4K User Manual

Output buttons or LEDs light or blink one of the following colors:
•
•
•
•
NOTES:
To clear unwanted outputs, press and release the associated output buttons that
•
are lit, or whose LEDs are lit. To indicate potential unties, output buttons or LEDs
blink the appropriate color when an output is deselected (muted) but not untied
from the input.
4. Press and release the
5. Repeat steps 1 through 4 to create or clear additional ties until the desired configuration
is complete.
NOTES:
•
•
•
•

Creating Ties

DXP 88 series
NOTE: Audio ties are made only with de-embedded audio.
To tie an input to an output:
1. Press and release the
button indicators whose LEDs might be lit.
ENTER
Figure 16.
Green — Video only ties
Red — Audio only ties (outputs 1 and 2 on the DXP 88 series, outputs 1
through 4 on the DXP 1616 series)
Amber — (DXP 1616 series only) Video and audio ties (outputs 1 through 4)
• To indicate potential ties, output buttons or LEDs blink in the appropriate
color when an input is selected.
• To indicate current ties, output buttons or LEDs light steadily in the
appropriate color when an input is selected.
button to accept the tie or to break an existing tie.
Enter
Only one input can be tied to an output. If you tie an input to an output that is
already tied to another input, the older tie is broken in favor of the newer tie.
If an input with no tie is selected, only the button or LED for the selected input
lights (no output buttons or LEDs light).
As each input and output is selected, the associated output button or LED
blinks the appropriate color to indicate a tentative tie. Buttons or LEDs for
outputs that were already tied to the input light the appropriate color steadily.
Outputs that are already tied can be left on, along with new blinking selections,
or toggled off by pressing the associated output button.
DXP 1616 series only — When the
input with an audio tie but no video tie is selected, the input button lights amber
and the output button lights the appropriate color (red, green, or amber).
button to clear any input button, output button, or control
Esc
Press the Esc button to clear all selections.
PRESET ESC I/O
The LED blinks once.
Press the Esc button
and buttons are lit, if an
Video Audio
VIDEO
AUDIO
DXP HD 4K Series • Operation 23