3.
Windows XP and earlier — Click
Install the software automatically (Recommended)
click
(you do not need to insert a disc).
Next
Figure 11.
Selecting the Radio Button to Install the USB Driver Automatically
The computer locates the driver needed for it to communicate with the DXP through the
USB port.
4.
Windows XP or earlier — When the
close the wizard.
Windows 7 or later — When the USB software has been located and downloaded,
the messages
Extron USB Device installed
Software Installation screen (a pop-up message appears above the Windows taskbar if
the screen is closed).
Figure 12.
Device Software Installation Window, Installation Complete
Click
to close the status window.
Close
5.
Configure the DXP as desired, using SIS commands (see
Control, starting on page 57) or the PCS configuration software (see the program help
file).
. On the next screen, make sure that the
Next
radio button is selected, then
screen appears, click
Completed
and
to use appear on the Driver
Ready
SIS Configuration and
DXP HD 4K Series • Installation
to
Finish
14