Removing A Tie From A Set Of Ties - Extron electronics DXP 44 HD 4K User Manual

Removing a Tie from a Set of Ties

DXP 88 Series
To undo an existing I/O tie:
1. Press and release the
2. Press the desired I/O button (
Press I/O button to
select audio or video.
Figure 35.
3. Press the input button whose tie you want to dissolve. The Input button LED and its tied
Output button LEDs light red (audio) or green (video), depending on your selection in
step 2 and on the types of ties the selected input currently has.
Figure 36 shows an example of selecting an audio-only tie to break.
Press and release an Input button.
The LED lights to indicate whether audio or
video was selected for the input.
Figure 36.
4. Press the desired output button whose LED is lit. The selected output button LED and
the
Enter
Press the Output button for the tie to be broken.
The LED starts to blink.
1
5
Figure 37.
5. Press the
Enter
>
button to clear any previous selections.
Esc
Video
VIDEO
I/O
Lights green when video is selected.
I/O
Lights red when audio is selected.
AUDIO
Selecting Audio or Video using the I/O Button
INPUTS
1 2 3
5 6 7
Selecting an Input
button LED start to blink.
OUTPUTS
2 3 4
6 7 8
Selecting the Output to Untie
button. The selected input and output buttons or their LEDs and the
Enter
button become unlit, and the tie is broken.
or ) for the type of tie you want to break.
Audio
The LEDs for any outputs already tied to the selected input
light to indicate the existing video ties (audio in this example).
4 1
8 5
ENTER
The Enter button LED blinks green,
indicating the need to confirm the
change.
DXP HD 4K Series • Operation
OUTPUTS
2 3 4
6 7 8
30