Extron electronics DXP 44 HD 4K User Manual page 35

3. Press and release the desired input button.
If only video is selected, its LED lights green to indicate that video outputs can be
•
tied to or untied from this input. Output button LEDs for any outputs already tied to
the selected input light green also (see figure 27).
Press and release an Input button.
The LED lights green to indicate that video
outputs can be tied to or untied from this input.
INPUTS
1 2
5 6
Figure 27. Selecting an Input with Ties (Video)
If only audio is selected, the LED for the selected input button lights red to
•
indicate that audio outputs (outputs 1 and 2 only) can be tied to or untied from this
input. If the other audio-capable output is already tied to the selected input, it lights
red also.
4. Press and release the button for the output to be added to the tie. The LED for the
selected output button blinks green (for video only, see figure 28) or red (for audio only)
to indicate that the selected input will be tied to this output.
In addition, the button LED blinks green.
Enter
Press and release the Output button to be
added to the tie.
The LED blinks green to indicate that the
selected video input will be tied to this output.
OUTPUTS
1 2
5 6
ENTER PRESET ESC
The Enter button LED blinks green to
indicate the need to confirm the change.
Figure 28. Selecting an Additional Output (Video)
5.
Press the button to confirm the tie. All button LEDs become unlit.
Enter
The LEDs for any outputs already tied to the selected
input light green to indicate the existing video ties.
3 4
7 8
3 4
7 8
VIDEO
I/O
AUDIO
OUTPUTS
1 2 3
5 6 7
DXP HD 4K Series • Operation
4
8
27