Selecting Lock Mode 2 Or Toggling Between Mode 2 And Mode 0; Selecting Lock Mode 2 Or Toggling Between Mode 2 And Mode 1 - Extron electronics XTP II CrossPoint 1600 Setup Manual

Advanced functions consist of:
Setting audio output mutes
•
Setting audio output volume
•
Setting audio/RS-232 wire pair and front panel configuration
•
The matrix switcher is shipped from the factory in Lock mode 2
Selecting Lock Mode 2 or Toggling Between Mode 2 and
Mode 0
NOTES:
•
•
Toggle the lock on or off by pressing and holding the
, and
View
(approximately 2 seconds).
Lock mode 1
C O N T R O L
ENTER PRESET VIEW ESC
Press and hold for
2 seconds.
Selecting Lock Mode 2 or Toggling Between Mode 2 and
Mode 1
NOTES:
•
•
Toggle the lock on and off by pressing and holding the
and
Esc
Lock mode 2
C O N T R O L
ENTER PRESET VIEW ESC
Press and hold for
2 seconds.
21 XTP II CrossPoint Series • Front Panel Operations
If the matrix switcher is in Lock mode 0 or mode 1, this
procedure selects mode 2. The
buttons blink twice.
If the matrix switcher is in Lock mode 2, this procedure
selects mode 0 (unlocks the matrix switcher). The
buttons blink twice.
Esc
buttons simultaneously until the buttons blink
Esc
C O N T R O L
ENTER
PRESET VIEW ESC
If the matrix switcher is in Lock mode 0 or mode 1, this
procedure selects mode 2. The
buttons blink twice.
If the matrix switcher is in Lock mode 2, this procedure
selects mode 1. The
button simultaneously for approximately 2 seconds.
C O N T R O L
ENTER PRESET
VIEW ESC
,
Preset
Lock mode 2
C O N T R O L
ENTER PRESET VIEW ESC
Press and hold for
2 seconds.
,
Preset
and buttons blink twice.
View Esc
Lock mode 0
C O N T R O L
ENTER PRESET VIEW ESC
Press and hold for
2 seconds.
, and
View Esc
and
View
,
Preset
C O N T R O L
ENTER
PRESET VIEW ESC
, and
View Esc
button
View
C O N T R O L
ENTER PRESET VIEW ESC